company |  leather |  samples |  news |  contact

Aeropelle

Top grain after market flame treated to pass FAR 25.853(a), Amendment 25-100, Appendix F, Part 1 (a) (1) (ii). Superior selection of European and New Zealand cattle hides are hand selected for Aeropelle. Luxurious soft hand and smooth supple surface makes this one of the most beautiful leathers available.

To request a sample, please check the box under your desired color, and click Submit.

Processing and Finishing


Aeropelle is processed using low emission mineral tanning formulas which are environmentally friendly. The hides are retanned in aged oak drums using vegetable agents, natural fat liquors and oils along with dyes that ensure the leather is properly through dyed. No PCP or CFC is used during the tanning process. Waterbased finishes are applied to provide an even coloration and protection to the leather.

Technical Specifications


Flammability: After market treatment FAR 25.853(a), Amendment 25-100, Passes Appendix F, Part I (a)(1)(ii)
Description: Aniline through dyed leather.
Raw Material: European
Hide Size :50 sq ft.
Thickness 0.8 to 1.0 mm
Abrasion (ASTM D-3884-92) 500 gram load 1000 cycles
Colorfastness to rubbing
Nr. 500 dry rubs: IUF 450 / UNI EN ISO 11640: > 4 grey scale
Nr. 150 wet rubs: IUF 450 / UNI EN ISO 11640: > 4 grey scale
Nr. 80 alkaline ph 8: IUF 450 / UNI EN ISO 11640: > 4 grey scale
Flexing endurance IUP 20 / UNI EN ISO 5402: > 30.000
Tear Strength IUP 40 / UNI EN ISO 3377-1: > 20 N
Adhesion IUF 470 / UNI EN ISO 116441: > 3.50 N/cm
Light Resistance (xenon test) IUF 402 / UNI EN ISO 105-B02: 5 blue scale
Origin: Vicenza, Italy

Complies with the strict regulations and EU Directives covering the use and presence of PCP, CFC, Chromo VI and Azo dyestuffs.

Contract | Hospitality | Aviation | Residential | Hair on Hides

4524 Green Point Dr, Suite 101
Greensboro, NC 27410
336.315.9720